Nexo NXAMP4x4 MK2 Powered Digital TD Controller/Amplifier for Sale

The Nexo NXAMP4x4 MK2 Powered Digital TD Controller/Amplifier for sale combines four high-output Class-D amplifier channels with integrated DSP, loudspeaker management and NEXO system control in a single professional platform. Designed for demanding touring and fixed-installation systems, the NXAMP4x4 MK2 delivers up to 4,500 W per channel at 2 Ω, incorporates 24-bit/96 kHz conversion, and provides loudspeaker-specific processing for compatible NEXO systems. It is a practical choice for rental companies, venues and system integrators that want amplification and dedicated loudspeaker management in one unit.

Unlike a conventional four-channel power amplifier, the NXAMP4x4 MK2 is designed as part of the wider NEXO ecosystem, bringing amplification, processing, protection and system configuration together.

Nexo NXAMP4x4 MK2 Power Output

The Nexo NXAMP4x4 MK2 Powered Digital TD Controller/Amplifier uses four independent Class-D amplifier channels engineered for professional high-output applications.

Output per Channel

With all four channels available independently, the amplifier provides the flexibility needed for multi-way systems and larger professional NEXO configurations.

Its maximum unloaded channel voltage is approximately 180 V peak.

High-Power Bridge Mode

Where an appropriate system configuration requires additional output, amplifier channels can be paired for bridge operation.

The supplied bridge-mode figures are:

• 6,600 W into 8 Ω
• 9,000 W into 4 Ω

This gives system designers additional flexibility when configuring suitable high-power professional loudspeaker loads.

Any bridge configuration should follow the correct NEXO system requirements and load limitations.

Integrated Digital TD Controller

One of the main reasons to choose a Nexo NXAMP4x4 MK2 Powered Digital TD Controller/Amplifier for sale rather than a generic amplifier is its integrated loudspeaker-management architecture.

The NXAMP platform combines power amplification with digital processing designed around NEXO loudspeaker systems.

This provides control over functions such as:

Equalization

Crossover processing

Delay

Limiting

Preset selection

Loudspeaker protection

Instead of building a system from separate amplifiers and external processors, compatible NEXO systems can be managed from one integrated platform.

24-Bit / 96 kHz Digital Processing

Signal conversion operates at 24-bit / 96 kHz, supported by high-performance DSP architecture.

This gives the processor the resolution required for detailed professional system management while maintaining very low processing latency.

The supplied specification indicates latency of approximately:

580 μs in a flat configuration

Low latency is particularly important in professional live-sound applications where unnecessary processing delay needs to be minimized.

NEXO Loudspeaker Presets

An important benefit of the NXAMP architecture is access to dedicated configurations for compatible NEXO loudspeakers.

Rather than relying solely on manually created generic crossover settings, system technicians can work with NEXO-specific configurations intended for the loudspeaker platform being deployed.

This can simplify setup while supporting correct:

• Frequency management
• Driver protection
• System limiting
• Crossover behavior
• Amplifier configuration

The correct preset should always be selected for the exact loudspeaker model and system configuration.

4.3-Inch Touchscreen Interface

The front panel provides a 4.3-inch color touchscreen combined with a rotary encoder.

This gives technicians direct access to system settings without requiring a computer for every adjustment.

The interface can be used to navigate configuration parameters and inspect important system information directly from the amplifier rack.

For rental companies, this can make onsite setup considerably more convenient.

Four Analog XLR Inputs

The amplifier provides:

4 balanced analog inputs

These allow four independent source channels to be routed into the system.

The input architecture supports professional balanced audio connections and can be integrated into larger touring, venue or installed-sound signal chains.

Four NL4 Loudspeaker Outputs

Four Speakon NL4 outputs provide loudspeaker connections.

This gives the NXAMP4x4 MK2 a straightforward physical output architecture for professional speaker systems.

However, cabling and pin configuration should always match the specific NEXO loudspeaker and system arrangement being used.

Expandable Digital and Network Connectivity

The Nexo NXAMP4x4 MK2 Powered Digital TD Controller/Amplifier can support additional connectivity through compatible expansion options.

Depending on the installed card and system configuration, this may include technologies such as:

• Dante
• AES/EBU
• EtherSound

This makes the amplifier relevant to professional environments moving beyond traditional analog-only signal distribution.

Because expansion cards are optional, a specific used NXAMP should not be advertised as including Dante, AES/EBU or EtherSound unless the installed card has been physically confirmed.

RS-232 and GPIO Integration

Additional control and integration options include RS-232 and GPIO connectivity.

These interfaces can be useful in permanent professional installations where the amplifier needs to interact with broader control or monitoring infrastructure.

That extends the product’s relevance beyond concert touring into theatres, entertainment venues and other engineered installations.

Built-In Protection for Professional Systems

High-power amplification requires comprehensive protection.

The NXAMP4x4 MK2 incorporates system-management functions intended to protect both the amplifier and compatible loudspeaker system.

Protection covers operating conditions such as:

• Thermal stress
• Overload
• Short circuit
• Output clipping
• Loudspeaker operating limits

This integrated approach is particularly important when an amplifier can deliver several thousand watts per channel.

Universal Power Supply with PFC

The power section incorporates Power Factor Correction (PFC) and supports a broad mains input range.

The supplied range is:

100–240 V AC

This makes the platform suitable for professional applications across different markets, subject to the appropriate mains infrastructure, connectors and electrical requirements.

Supplied consumption figures are approximately 10 W in standby and around 200 W at idle.

Nexo NXAMP4x4 MK2 Technical Specifications

NXAMP4x4 MK2 for NEXO Professional Systems

The Nexo NXAMP4x4 MK2 Powered Digital TD Controller/Amplifier for sale is particularly relevant to businesses already using NEXO loudspeakers.

Instead of adding an unrelated amplifier platform, existing NEXO owners can maintain a more integrated system architecture.

Potential applications include compatible:

Line arrays

Point-source systems

Subwoofer packages

Touring systems

Rental inventories

Permanent installations

This makes NXAMP searches highly transactional because many potential buyers already know the exact amplifier/controller their system requires.

Professional Touring Applications

Touring sound companies require equipment that can handle demanding professional workloads while remaining flexible enough for different system configurations.

The four-channel architecture allows technicians to configure multiple loudspeaker circuits within one amplifier.

Integrated DSP also reduces dependence on separate external processing hardware for supported system functions.

That can help simplify touring racks and system deployment.

NXAMP4x4 MK2 for Rental Companies

Professional rental companies may use NXAMP4x4 MK2 units to build standardized amplifier inventories around their NEXO loudspeakers.

Additional units can help a rental company:

• Support larger systems
• Run simultaneous events
• Expand NEXO inventory
• Maintain backup amplification
• Build additional amplifier racks
• Standardize system processing

For businesses already invested in NEXO equipment, these operational benefits can be more important than amplifier wattage alone.

Permanent Installation Applications

The NXAMP4x4 MK2 can also serve fixed professional installations where centralized system control and high channel density are important.

Typical applications can include:

Theatres

Live music venues

Clubs

Performance halls

Houses of worship

Entertainment facilities

Large event spaces

Network and control expansion options can further support integration into sophisticated installed systems.

Why Choose the NXAMP4x4 MK2?

The value of this amplifier comes from combining several functions in one professional chassis.

You get four-channel amplification with substantial output capability, integrated NEXO processing, touchscreen operation, loudspeaker presets, protection functions and expansion possibilities.

For compatible NEXO systems, this integrated design can be preferable to assembling the same core functions from several unrelated devices.

Buy Nexo NXAMP4x4 MK2 Powered Digital TD Controller/Amplifier

For professional users searching for a Nexo NXAMP4x4 MK2 Powered Digital TD Controller/Amplifier for sale, the model offers a combination of substantial four-channel output and NEXO-specific system management.

Its 4 × 4,500 W maximum 2-ohm output capability, 96 kHz processing, touchscreen interface and integrated loudspeaker management make it particularly suitable for professional touring, rental and installed NEXO systems.

Shipping can be arranged to supported destinations throughout Germany, France, the Netherlands, Italy and other European countries.

Frequently Asked Questions

How many channels does the Nexo NXAMP4x4 MK2 have?

It provides four independent Class-D amplifier channels.

How much power does the NXAMP4x4 MK2 produce at 4 ohms?

The supplied specification is 3,300 W per channel at 4 Ω.

What is its maximum output at 2 ohms?

It can provide up to 4,500 W per channel at 2 Ω according to the supplied specifications.

Can the NXAMP4x4 MK2 operate in bridge mode?

Yes. The supplied bridge ratings are 6,600 W at 8 Ω and 9,000 W at 4 Ω.

Does it include DSP?

Yes. Integrated digital processing provides EQ, crossover, delay, limiting, presets and system-management functions.

What sample rate does the DSP use?

The supplied specification states 24-bit / 96 kHz conversion.

Does the NXAMP4x4 MK2 have a touchscreen?

Yes. It features a 4.3-inch color touchscreen together with a rotary encoder.

Does every NXAMP4x4 MK2 include Dante?

Not necessarily. Digital/network functionality can depend on the optional expansion card installed in the individual amplifier.

Can it be used with NEXO subwoofers?

It is designed to power and manage compatible NEXO loudspeaker systems, including supported subwoofer configurations when the correct presets and wiring are used.

Is it suitable for touring and rental use?

Yes. Touring systems, professional rental inventories and permanent installations are among its primary applications.