Powersoft M50Q DSP ETH for Sale | 4-Channel Amplifier with DSP & Ethernet

The Powersoft M50Q DSP ETH for sale is a compact four-channel professional power amplifier combining high-efficiency amplification, integrated DSP and Ethernet-based remote management. With up to 1,250 W per channel at 4 ohms and 750 W per channel at 8 ohms, the M50Q provides four independent amplifier channels from a space-efficient 1U chassis. The DSP+ETH configuration adds loudspeaker processing, preset management and remote system control, making it particularly useful for touring racks, professional installations, stage-monitor systems and multi-zone audio applications.

Powersoft M50Q DSP ETH Power Output

The Powersoft M50Q DSP ETH provides four amplifier channels, allowing a single unit to power several compatible loudspeaker circuits.

Output Ratings

With four channels available from one chassis, the M50Q can reduce the number of separate amplifiers required for multi-channel professional systems.

4 × 1,250 Watts at 4 Ohms

At 4 ohms, the supplied output rating is:

4 × 1,250 W

That represents 5,000 watts of combined rated channel output when all four channels are considered at the supplied 4-ohm specification.

This channel density makes the amplifier particularly useful for professional systems requiring several independently controlled outputs.

4 × 750 Watts at 8 Ohms

At 8 ohms, the M50Q delivers:

4 × 750 W

These independent channels can be assigned to compatible loudspeakers according to the requirements of the system.

Professional users should always match amplifier output, impedance and DSP parameters to the connected loudspeaker specifications.

Up to 2,500 Watts in Bridged Configuration

Where greater output from a channel pair is required, the amplifier supports bridged operation.

The supplied rating is:

Up to 2,500 W per bridged channel pair

This provides additional configuration flexibility for compatible loudspeaker loads.

Integrated DSP Processing

The Powersoft M50Q DSP ETH for sale goes beyond conventional amplification by incorporating digital signal processing.

Instead of relying entirely on a separate loudspeaker processor, engineers can manage important system parameters within the amplifier platform.

Available processing includes functions such as:

• Parametric EQ
• Crossover filtering
• Delay
• Limiters
• Output management
• Preset configuration

This makes the DSP version especially attractive for installations where rack space and system simplicity matter.

Parametric Equalization

Integrated parametric EQ allows technicians to adjust the response of individual channels according to system requirements.

This can be useful for correcting loudspeaker response, integrating different system sections or optimizing sound for a particular venue.

Because each installation is different, EQ should be configured by a qualified system technician rather than relying on arbitrary settings.

Crossover Management

The onboard DSP can also handle crossover duties.

For multi-way professional systems, different frequency ranges may need to be directed to different loudspeaker components.

A four-channel amplifier with integrated processing can therefore be useful for bi-amped or other multi-way configurations.

DSP Delay for System Alignment

Delay processing provides another valuable tool for professional system design.

It can help engineers align loudspeakers positioned at different distances from the listening area.

Potential applications include:

Main PA and fills

Delay loudspeakers

Distributed systems

Stage monitoring

and other configurations requiring time alignment.

Integrated Limiting

The DSP platform includes limiting functions designed to help manage amplifier output and protect appropriately configured loudspeakers.

Professional technicians can configure limits according to the electrical and thermal requirements of the connected speaker system.

This is especially important in rental environments where equipment may be operated by different users.

Ethernet Remote Control

The ETH component of the Powersoft M50Q DSP+ETH configuration provides network connectivity.

Rather than requiring every adjustment to be made directly at the amplifier rack, compatible parameters can be managed remotely over Ethernet.

This can be especially useful in installations where amplifiers are located in equipment rooms away from the mixing position.

Powersoft Armonía Control

The amplifier can be integrated with compatible Powersoft Armonía system-management workflows.

This provides technicians with centralized access to amplifier configuration and monitoring functions.

In a larger professional installation, remote control can make it easier to manage multiple amplifier channels without repeatedly accessing physical equipment racks.

Preset Management

Preset functionality provides a practical way to store different amplifier and DSP configurations.

This can be valuable when the same system needs to operate in several modes.

For example, a venue may require one configuration for live music and another for corporate events or speech reinforcement.

Stored presets can simplify the transition between these system setups.

Real-Time System Monitoring

Ethernet connectivity also improves system supervision.

Depending on configuration, technicians can monitor relevant operating parameters and identify potential issues from a centralized control position.

For permanent installations, this can simplify troubleshooting and routine system management.

Compact Four-Channel 1U Design

One of the strongest advantages of the Powersoft M50Q DSP ETH for sale is its combination of channel density and physical size.

The amplifier provides:

4 amplifier channels in only 1U

This can significantly reduce rack-space requirements compared with using multiple conventional two-channel amplifiers.

The supplied weight is approximately 7 kg, further supporting applications where compact and manageable racks are important.

High-Efficiency Amplification

The M50Q uses an efficient professional amplifier architecture designed to reduce unnecessary heat generation.

Efficiency becomes particularly valuable when several amplifiers are installed in the same rack.

Less wasted energy means the cooling system has less heat to remove, although appropriate rack ventilation remains essential.

Power Factor Correction

The amplifier incorporates power-supply technology designed for reliable professional operation.

Power Factor Correction helps optimize interaction with the mains supply.

For high-output installations, the available electrical infrastructure should always be evaluated according to the actual system load.

Professional Amplifier Protection

Built-in protection helps safeguard the amplifier against abnormal operating conditions.

Protection functions cover areas such as:

• Excessive temperature
• Short circuits
• DC conditions
• Excessive voltage
• Output clipping

Temperature-controlled cooling further helps maintain reliable operation during extended professional use.

Powersoft M50Q DSP ETH for Stage Monitors

Four independent channels make the M50Q particularly interesting for professional monitor systems.

Different channels can be assigned to separate compatible monitor circuits while DSP provides individual EQ, limiting and delay where required.

For touring companies, this can help create compact monitor amplifier racks with fewer individual devices.

Multi-Zone Professional Audio

The amplifier can also be used for distributed audio systems.

Four channels allow multiple loudspeaker zones to be managed from one amplifier.

Potential environments include:

• Theatres
• Entertainment venues
• Clubs
• Conference facilities
• Performance spaces
• Corporate AV installations
• Houses of worship
• Multi-purpose venues

Each channel can be configured according to the requirements of the connected system.

Bi-Amped Loudspeaker Systems

Four-channel amplification also provides useful flexibility for bi-amped systems.

For example, separate amplifier channels can be assigned to different frequency sections while onboard DSP manages crossover, EQ and limiting.

This creates a more integrated solution than combining several amplifiers with an additional standalone processor.

Touring and Rental Applications

The Powersoft M50Q DSP ETH for sale is also well suited to professional mobile applications.

Its combination of four channels, DSP, Ethernet and a compact chassis makes it relevant for:

Touring systems

PA rental companies

Monitor racks

Festival production

Corporate AV

Live events

Professional mobile systems

A rental company can also store appropriate configurations for different loudspeaker packages, helping technicians deploy systems more consistently.

Powersoft M50Q DSP ETH Technical Specifications

M50Q DSP+ETH vs Standard Power Amplifier

The integrated processing and networking distinguish this model from a basic four-channel amplifier.

For professional users wanting an integrated amplifier and system-management platform, these additional capabilities can reduce external hardware requirements.

Why Choose the Powersoft M50Q DSP ETH?

The primary advantage is the combination of four-channel amplification, onboard processing and remote control in a compact chassis.

Instead of dedicating rack space to multiple amplifiers and separate processors, the M50Q provides several important system functions within one professional platform.

This makes it particularly attractive for space-conscious touring racks and permanent installations.

Buy Powersoft M50Q DSP ETH in Europe

Professional customers searching for a Powersoft M50Q DSP ETH for sale in Europe can consider this amplifier for touring, rental, stage-monitor, multi-zone and permanent professional sound systems.

With 4 × 1,250 W at 4 Ω, integrated DSP and Ethernet-based control, the M50Q provides substantial multi-channel amplification while allowing technicians to manage processing and system parameters remotely.

Shipping can be arranged to supported destinations across Germany, France, the Netherlands, Italy and other European countries.

Frequently Asked Questions

How many channels does the Powersoft M50Q have?

The M50Q is a four-channel professional amplifier.

How much power does the M50Q provide at 4 ohms?

The supplied specification is 1,250 W per channel at 4 Ω, or four independently amplified channels.

What is the output at 8 ohms?

The supplied specification is 750 W per channel at 8 Ω.

Does the Powersoft M50Q have DSP?

Yes. This listing is specifically for the DSP+ETH configuration, which includes onboard digital signal processing.

What does ETH mean?

ETH refers to the amplifier’s Ethernet connectivity, which supports compatible remote management and monitoring.

Can I control the M50Q remotely?

Yes. The Ethernet-equipped version supports compatible Powersoft remote-control and system-management workflows.

Does it support presets?

Yes. Preset functionality allows configurations to be stored and recalled for different system requirements.

Can the M50Q be used for stage monitors?

Yes. Its four independent channels and integrated DSP make professional monitor systems a relevant application.

Is it suitable for fixed installations?

Yes. The compact rack format, Ethernet control and multi-channel design are useful for permanent professional installations.

Can it be used for touring?

Yes. Its compact 1U format, relatively low weight and four-channel architecture also make it useful for touring and professional rental systems.