XTA DP226 for Sale | 2-In / 6-Out Loudspeaker Management Processor

The XTA DP 226 2 IN 6 OUT for sale is a professional 2-input / 6-output digital loudspeaker management processor designed for touring PA systems, clubs, theatres, live venues and permanent sound installations. It combines crossover management, parametric EQ, delay, output limiting and flexible signal routing in a compact 1U rackmount processor.

With six independently configurable outputs, the DP226 is particularly useful for multi-way professional loudspeaker systems where accurate crossover, alignment and protection are required.

XTA DP226 Technical Overview

2 Inputs / 6 Outputs

The DP226 provides:

2 × Inputs

and

6 × Independently Controlled Outputs

This configuration makes the processor suitable for systems that need several frequency bands or loudspeaker sections controlled from a stereo source.

A single DP226 can therefore become the central processing unit for a substantial professional PA configuration.

Flexible Crossover Configurations

One of the major advantages of the XTA DP226 is its flexible crossover architecture.

The six outputs can be arranged for different professional system configurations, including:

• Stereo multi-way systems
• 2-way configurations
• 3-way configurations
• 4-way systems
• 5-way systems
• 6-way processing
• Subwoofer and top combinations
• Delay and fill systems

The exact routing can then be adjusted according to the loudspeaker system being used.

Professional Crossover Filters

Each output provides high-pass and low-pass filtering for precise division of the audio spectrum.

Available crossover families include:

Butterworth

Bessel

Linkwitz-Riley

with selectable filter slopes depending on the required system configuration.

This allows the engineer to establish appropriate crossover points between subs, bass cabinets, midrange sections and high-frequency drivers.

Parametric Equalization

The DP226 provides detailed EQ control for professional system tuning.

Input processing allows the overall signal to be shaped before it reaches the individual outputs, while output EQ can be applied to specific loudspeaker sections.

This can be used for:

System voicing

Frequency-response correction

Driver optimization

Room compensation

and

Loudspeaker-specific tuning.

Precision Output Delay

Each output provides independent delay control of up to approximately:

650 ms

This gives system engineers substantial flexibility for time alignment.

Delay can be used to align:

Subwoofers and tops

Separate drivers

Different loudspeaker cabinets

Delay towers

Front fills

or

Distributed speaker zones.

Precise alignment can significantly improve system coherence when configured correctly.

Independent Output Limiting

Each output includes its own limiter.

This is particularly important in professional PA applications because different loudspeaker components may have different power-handling requirements.

Limiter thresholds can be configured to help protect:

• Compression drivers
• Midrange drivers
• Full-range cabinets
• Bass cabinets
• Subwoofers

Correct values should always be calculated from the actual loudspeaker and amplifier specifications.

Professional Loudspeaker Protection

The DP226 can act as an important protection stage between the mixer and amplifier rack.

When properly configured, its combination of:

Crossovers

EQ

Limiters

Gain management

and

Filtering

helps keep the connected loudspeaker system operating within its intended parameters.

Preset Storage

The processor can store multiple system configurations internally.

Up to approximately:

40 Presets

can be retained for recall.

This is particularly useful for rental companies or venues where the same processing rack may be used with several loudspeaker configurations.

For example, separate presets could be maintained for:

Indoor systems

Outdoor systems

Different speaker packages

Club configurations

or

Touring setups.

Remote Control

The DP226 supports remote management through professional communication interfaces such as:

RS-232

RS-485

and

MIDI

depending on the system configuration.

Compatible control software can make it easier to adjust parameters from a computer, especially when the processor is installed inside a rack away from the mixing position.

Front-Panel Control

The processor can also be configured directly from its front panel.

The interface provides access to important parameters such as:

Input settings

Output settings

EQ

Crossovers

Delay

Gain

Mute

Limiters

and

Preset recall.

This allows the unit to remain fully usable even when computer control is unnecessary.

Compact 1U Rackmount Design

All of the processing functionality is contained within a:

1U 19-Inch Rackmount Chassis

The compact design is useful for touring racks where equipment space needs to be minimized.

It can be installed alongside professional amplifiers from brands such as Lab Gruppen, Powersoft, MC² Audio, Full Fat Audio and other touring-grade amplification platforms.

Ideal for Multi-Way Professional Systems

The DP226 is particularly useful when one loudspeaker system contains several independently amplified sections.

For example, outputs could be assigned to separate:

Sub

Bass

Mid

and

High-frequency

sections.

The exact configuration depends entirely on the loudspeaker system and amplifier rack.

Professional Applications

The XTA DP226 can be used for:

• Touring sound systems
• Concert PA
• Festivals
• Nightclubs
• Theatres
• Live music venues
• Professional rental systems
• Fixed installations
• Multi-way loudspeaker systems
• Subwoofer management
• Delay towers
• Monitor systems
• System alignment

Its 2-in/6-out format makes it especially useful for professional stereo systems requiring several processed outputs.

Useful for Classic Professional PA Systems

The XTA DP226 can also be attractive for operators maintaining older professional sound systems.

Many classic touring systems require external processing for crossover, EQ, delay and limiting rather than having DSP integrated directly into each amplifier.

A dedicated processor such as the DP226 can therefore remain useful when building or maintaining these systems.

Condition & Price

No specific selling price or condition was supplied for this particular unit.

Therefore, the product page should currently show:

Price: Contact for Current Price

The condition should likewise be confirmed before describing the unit as excellent, mint or fully refurbished.

Flightcases, power cables and other accessories should only be listed if confirmed as included.

Frequently Asked Questions

What is the XTA DP226?

The XTA DP226 is a professional 2-input / 6-output digital loudspeaker management processor used for crossover, EQ, delay, routing and loudspeaker protection.

How many outputs does the DP226 provide?

It provides:

6 outputs

with independent processing.

Can it be used as a crossover?

Yes. Crossover management is one of the DP226’s primary functions.

What crossover filters are available?

The processor provides professional crossover options including Butterworth, Bessel and Linkwitz-Riley filter types.

Does it have EQ?

Yes. Parametric equalization is available for detailed system tuning.

Does the XTA DP226 have delay?

Yes. Independent output delay is available up to approximately 650 ms, providing substantial flexibility for loudspeaker and system alignment.

Does it have limiters?

Yes. Each output provides independent limiting for system protection.

Can settings be saved?

Yes. Multiple presets can be stored internally, with up to approximately 40 memories available.

Can the DP226 be remotely controlled?

Yes. It supports professional remote-control interfaces including RS-232, RS-485 and MIDI.

How much rack space does it require?

The processor occupies only:

1U

of standard 19-inch rack space.